 |
|||
 |
 |
[Home] |
|
Standard height
winches are for bottom mounting only. |
TRUCK & TRAILER EQUIPMENT
| WINCH BINDERS |
|
|
|||||||||||||
|
|
||||||||||||||||
|
All Winch Binders are Painted with "Hard Coat"
- Black Enamel
|
|
|
DURABILT
WINCHES FOR WEBBING TIE-DOWNS |
WINCHES ARE DESIGNED
TO MEET OR EXCEED CURRENT REGULATIONS OF THE DEPARTMENT OF TRANSPORTATION (DOT) & THE CALIFORNIA HIGHWAY PATROL (CHP). DURABILT OFFERS A WIDE RANGE OF DESIGNS AND SIZES FOR USE WITH 2", 3" AND 4" WEBBING OR APPROPRIATE SIZE CABLE IN ORDER TO PROVIDE THE CORRECT WINCH FOR THE APPLICATION. FEATURES INCLUDE: STRONGER MATERIALS FOR SUPERIOR STRENGTH. PRECISION STEEL SPROCKETS AND LATCHES FOR DEPENDABILITY, CONSISTENCY, AND EASY OPERATION. SMOOTH ROUNDED CONTOURS FOR REDUCED WEBBING WEAR AND APPEARANCE |
 WARNING:
ALL WINCH BINDER WORKING LOAD LIMITS (WLL) WITHOUT WEBBING = 5000LB.NEVER
EXCEED WORKING LOAD LIMIT. (WLL) READ ALL.......................WARNINGS BEFORE USE OF THESE PRODUCTS. |
|
DURABILT WINCH BINDER SPECIFICATIONS
|
|
PRODUCT
ORDER CODE# |
PC.
PER BOX |
DIMENSIONS
|
WEIGHT
LB. |
DESCRIPTION
|
|||
| A IN. |
B IN. |
C IN. |
|||||
| WB-ST- WO |
6
|
4-7/8
|
5-5/16
|
3-9/16
|
7.7
|
STANDARD WELD-ON | |
| WB-STD-LP-WO |
6
|
4-7/8
|
4-5/16
|
3-9/16
|
8.4
|
STD.LOW-PROFILE WELD-ON | |
| WB-STD-PORT-2S |
6
|
4-7/8
|
5-5/16
|
3-9/16
|
8.9
|
STD.PORTABLE w/2 set screws | |
| WB-LP-PORT-2S |
6
|
4-7/8
|
4-5/16
|
4
|
9.3
|
LOW-PROFILE PRTBL 2 set screws | |
| WB-STD-EZ-SLD |
6
|
5
|
5-1/2
|
4
|
8.1
|
STANDARD E-Z SLIDE (motched) | |
| WB-DEEP-EZ-SLD |
6
|
4-7/8
|
7-1/2
|
4
|
11
|
DEEP(storable)E-Z-SLIDE(notched) | |
| WB-SPCL-T-SLD |
6
|
5
|
5-9/16
|
4
|
8
|
SPECIAL TRACK E-Z-SLIDE | |
| WB-STD-COMB-WO |
6
|
6-9/16
|
5
|
3-1/2
|
10
|
STD.COMBINATON for cable & webb | |
| WBA-BAR-32P |
6
|
STEEL WINCH BAR
|
5
|
PAINTED BLACK | 32"LONG | ||
| WBA-BAR-32C |
6
|
STEEL WINCH BAR
|
5
|
CHROMED | 32"LONG | ||
|
|
|
||||||
| All Durabilt winch binders should be installed so the user can view
the pawl to insure proper engagement.The winch binder should be positioned
so the pawl falls into the teeth of the ratchet by gravity. Never use fingers or hands to engage or disengage latch pawl.(WARNING:Keep fingers clear) Winch binders should never be installed in a position where the user cannot view the pawl engagement,or where the user must hold the pawl to engage the ratchet tooth. All winch binders,except portable and sliding,must be welded or bolted to the trailer structure. Minimum welding requirements are 1/4"fillet weld,4"long on both sides of frame and 1/8" penetration.Use welding wire (filler) compatible with AISI 1015 steel. If winch binders are installed in a track, the track should attach to the trailer structural members. |
||||||
|
||||||
