Durapullers
Compactor Ratchets

Winch Binders/Bars
Lever Load Binders

Forged Hooks
Tarp Straps
Lever Operated Hoists		  
Back to Home
[Home]

Standard height winches are for bottom mounting only.
Low Profile winches are desgined for side mounting only.
Deep Storable winches are for bottom mounting also and ofter added capacity for storing up to 30' of webbing.
TRUCK & TRAILER EQUIPMENT
WINCH BINDERS
WELD-ON
WB-STD-WO WB-STD-LP-WO
 
PORTABLE
WB-STD-PORT-2S WB-LP-PORT-2S
WELD-ON COMBO
WB-STD-COMB-WO
 
E-Z SLIDE WINCHES WITH TENSION-LOCK DESIGN
WB-STD-EZ-SLD WB-DEEP-EZ-SLD WB-SPCL-T-SLD
All Winch Binders are Painted with "Hard Coat" - Black Enamel
 
 
DURABILT
WINCHES
FOR
WEBBING
TIE-DOWNS
WINCHES ARE DESIGNED TO MEET OR EXCEED CURRENT
REGULATIONS OF THE DEPARTMENT OF TRANSPORTATION (DOT)
& THE CALIFORNIA HIGHWAY PATROL (CHP).
DURABILT OFFERS A WIDE RANGE OF DESIGNS AND SIZES FOR USE
WITH 2", 3" AND 4" WEBBING OR APPROPRIATE SIZE CABLE IN ORDER
TO PROVIDE THE CORRECT WINCH FOR THE APPLICATION.
FEATURES INCLUDE:
STRONGER MATERIALS FOR SUPERIOR STRENGTH.
PRECISION STEEL SPROCKETS AND LATCHES FOR DEPENDABILITY,
CONSISTENCY, AND EASY OPERATION.
SMOOTH ROUNDED CONTOURS FOR REDUCED WEBBING WEAR
AND APPEARANCE
WARNING: ALL WINCH BINDER WORKING LOAD LIMITS (WLL) WITHOUT WEBBING = 5000LB.NEVER EXCEED WORKING
....................... LOAD LIMIT. (WLL) READ ALLWARNINGS BEFORE USE OF THESE PRODUCTS.
DURABILT WINCH BINDER SPECIFICATIONS
PRODUCT
ORDER
CODE#
PC.PER
BOX
DIMENSIONS
WEIGHT
( LB.)
DESCRIPTION
A
( IN.)		 B
( IN.)		 C
( IN.)
WB-ST - WO
6
4-7/8
5-5/16
3-9/16
7.7
 STANDARD WELD-ON
WB-STD-LP-WO
6
4-7/8
4-5/16
3-9/16
8.4
 STD.LOW-PROFILE WELD-ON
WB-STD-PORT-2S
6
4-7/8
5-5/16
3-9/16
8.9
 STD.PORTABLE w/2 set screws
WB-LP-PORT-2S
6
4-7/8
4-5/16
4
9.3
 LOW-PROFILE PRTBL 2 set screws
WB-STD-EZ-SLD
6
5
5-1/2
4
8.1
 STANDARD E-Z SLIDE (motched)
WB-DEEP-EZ-SLD
6
4-7/8
7-1/2
4
11
 DEEP(storable)E-Z-SLIDE(notched)
WB-SPCL-T-SLD
6
5
5-9/16
4
8
 SPECIAL TRACK E-Z-SLIDE
WB-STD-COMB-WO
6
6-9/16
5
3-1/2
10
 STD.COMBINATON for cable & webb
WBA-BAR-32P
6
STEEL WINCH BAR
5
 PAINTED BLACK 32"LONG
WBA-BAR-32C
6
STEEL WINCH BAR
5
 CHROMED 32"LONG
 
WINCH BINDER INSTALLATION
All Durabilt winch binders should be installed so the user can view the pawl to insure proper engagement.The winch binder should be positioned so the pawl falls into the teeth of the ratchet by gravity.
Never use fingers or hands to engage or disengage latch pawl.(WARNING:Keep fingers clear) Winch binders should never be installed in a position where the user cannot view the pawl engagement,or where the user must hold the pawl to engage the ratchet tooth.
All winch binders,except portable and sliding,must be welded or bolted to the trailer structure.
Minimum welding requirements are 1/4"fillet weld,4"long on both sides of frame and 1/8" penetration.Use welding wire (filler) compatible with AISI 1015 steel.
If winch binders are installed in a track, the track should attach to the trailer structural members.
 
WARNING: ALL WINCH BINDER WORKING LOAD LIMITS (WLL) WITHOUT WEBBING = 5000LB.NEVER EXCEED WORKING
....................... LOAD LIMIT. (WLL) READ ALLWARNINGS BEFORE USE OF THESE PRODUCTS.
__ [Home] __ [Top]